Wärmeträgerflüssigkeiten sind Gase oder Flüssigkeiten, die speziell für den Zweck der Wärmeübertragung von einem System auf ein anderes in einem geschlossenen Kreislauf als kontinuierlicher Zyklus hergestellt werden. Wärmeträgerflüssigkeiten werden in zahllosen Anwendungen und industriellen Prozessen eingesetzt, die Heizen oder Kühlen erfordern , typischerweise in einem geschlossenen Kreislauf und in kontinuierlichen Zyklen. Die zunehmende Anzahl von konzentrierten Solarkraftwerken mit der steigenden Nachfrage nach sauberer Energie treibt das Wachstum des HTF-Marktes voran. Außerdem findet HTF Anwendung in verschiedenen Endverbrauchsbranchen wie der Chemie-, Automobil-, Öl- und Gas-, erneuerbaren Energie-, Lebensmittel- und Getränke-, HVAC- und Pharmaindustrie. Wärmeträgerflüssigkeiten sind Industrieprodukte aus Erdölquellen, die verwendet werden, um Überhitzung zu verhindern und Wärmeenergie zu speichern. Die grundlegenden Rohstoffe für die Produktion sind Rohöl, Kieselsäure und Grundöle. Die wichtigen Eigenschaften, die eine Wärmeträgerflüssigkeit definieren, sind niedrige Viskosität, Korrosionsbeständigkeit, hohe Wärmeleitfähigkeit und Diffusivität sowie extreme Phasenübergangstemperaturen. Wärmeträgerflüssigkeiten (HTFs) sind Gase oder Flüssigkeiten, die speziell für den Zweck der Wärmeübertragung von einem System auf ein anderes hergestellt werden. Diese Flüssigkeiten werden aus hochraffiniertem Erdöl, synthetisch hergestellten Kohlenwasserstoffen oder Siloxanen ( Silikon ) hergestellt. Sie ermöglichen hohe Temperaturen bei sehr niedrigem Systemdruck und bieten außerdem Sicherheit, geringen Wartungsaufwand und eine längere Betriebsdauer als Hauptvorteile. Dies wird voraussichtlich den HTF-Markt beeinflussen.
| ATTRIBUT | DETAILS |
| Studiendauer | 2021-2029 |
| Basisjahr | 2021 |
| Voraussichtliches Jahr | 2021-2029 |
| Einheit | Wert (Milliarden USD), (Kilotonnen) |
| Segmentierung | Nach Produkt, nach Endverwendung, nach Region |
| Nach Produkt |
|
| Nach Endverwendung |
|
| Nach Region |
|
In der Öl- und Gasindustrie werden Wärmeträgerflüssigkeiten auf Offshore-Plattformen und in Raffinerien zum Heizen von Anlagen und zur Regeneration von Glykolen verwendet, um Wasser aus dem produzierten Erdgas zu entfernen und um Verdampfer und Kolonnen für die Destillation von Öl und ölbasierten Produkten zu heizen. Im Jahr 2022 verlief die Produktion von Rohöl und Erdgas aufgrund der Pandemie aufgrund des Rückgangs des Verbrauchs von Öl und Gas und verwandten Produkten langsam. Aufgrund dieses Faktors ist die Nachfrage nach Wärmeträgerflüssigkeiten in der gesamten Öl- und Verarbeitungsindustrie zurückgegangen, was sich voraussichtlich in naher Zukunft auf das Marktwachstum auswirken wird.
Ähnlich wie andere Unternehmen hat auch der globale Markt für Wärmeträgerflüssigkeiten aufgrund der durch Covid-19 verursachten Pandemie Veränderungen erfahren. Im Chemiesektor war der HTF-Markt im Jahr 2022 schleppend, als die Auswirkungen einen starken Rückgang der chemischen Fertigungsindustrie verursachten. Der Markt in den USA und Europa verzeichnete ebenfalls einen Rückgang der chemischen Produktionskapazität, da die Anlagen geschlossen oder mit einer begrenzten Belegschaft betrieben wurden.
Um sich von den durch die Pandemie verursachten Verlusten zu erholen, haben die meisten Hersteller ihre Budgets in der Forschungs- und Entwicklungsabteilung gekürzt und diese umstrukturiert, um ihre grundlegende Funktion in den verschiedenen Endverbrauchsbranchen aufrechtzuerhalten.
Chicory market is estimated grow at a rate of 9.3% CAGR till 2029 with an estimated value of USD 6.88 billion.
The growth of this market can be attributed to growth of chemical & petrochemical processing, oil & gas and automotive industries.
The following is the list of the major market player of Heat transfer fluid market who fulfill the need of the industry with their proper segmentation and strategies; Eastman Chemical Company (US), The Dow Chemical Company (US), ExxonMobil (US), Chevron (US), Lanxess (Germany), Shell plc (Netherlands), Hindustan Petroleum Corporation Limited (India), Phillips 66 Company (US), Preterm (US), and Arkema (France).
Amongst all the region which contain the Heat transfer fluid market the largest stake is held by North American region.
HTF are used in various end use industries including of chemical & petrochemical processing, oil & gas and automotive industries. Due to the ongoing pandemic, these industries have been severely affected throughout the world. Manpower shortage, logistical restrictions, material unavailability, and other restrictions have slowed the growth of the industry in a considerable manner.
The HTF market is segmented by product, by end use industry and by region. The mineral oil segmented for the major share of HTF market in 2019. Mineral oil is considered to be inexpensive in comparison to other synthetic liquids as its initial cost is greater than the initial cost of mineral oil. There is seen to be loss in thermal fluid during the maintenance of thermal heater and it is expensive to replace the fluid back in the system. The regions of Asia Pacific and Middle east and Africa are the highest end user region but the usage is mainly on low-cost products.
The mineral oil segment accounted for the major share in 2019. Mineral oil is inexpensive in comparison to synthetic liquids as its initial cost is two to three times greater than the initial cost of mineral oil. There is loss of thermal fluid during the maintenance of a thermal heater, and it is expensive to replace the fluid back into the system. Even if the cost of replacing the fluid is higher, the cost of replacing mineral oil is much less than the cost associated with replacing a synthetic fluid. Furthermore, it is widely used in APAC and MEA regions where the focus is on the usage of low-cost products.
The End Use industry generally includes Chemical & Petrochemical, Oil & Gas, Automotive, Renewable Energy, Pharmaceutical and other, amongst these user, Chemical segment has accounted for the major heat transfer fluid market share. The increase in demand for chemical from automotive, energy and resource, construction, consumer goods and other has increased the production of chemicals. This factor has resulted in increase of demand for heat transfer fluids from chemical manufacturer for indirect heating of process liquids and polymers, pipeline tracing, energy recovering, dying and heating of bulk materials and gas processing and others.
Asia Pacific is a highly attractive market for HTFs. The rapid industrialization witnessed by the emerging economies in the region, especially in China and India, is creating a high demand for HTFs. Leading HTF manufacturers such as Dow, Indian Oil Corporation, Hindustan Petroleum Corporation Limited, and Dalian Rich Fortune Chemical Company are adopting marketing strategies such as product launches and developments to increase their share in the Asia Pacific HTF market. The renewable energy sector in India is likely to be one of the fast-growing segments in the HTF market in Asia Pacific.
The regional segment is dominated by Asia Pacific region.
[caption id="attachment_11773" align="alignleft" width="680"]
Eastman Chemical Company (US), The Dow Chemical Company (US), ExxonMobil (US), Chevron (US), Lanxess (Germany), Shell plc (Netherlands), Hindustan Petroleum Corporation Limited (India), Phillips 66 Company (US), Preterm (US), and Arkema (France).
For corporate expansion, these key leaders are implementing strategic formulations such as new product development and commercialization, commercial expansion, and distribution agreements. Moreover, these participants are substantially spending in product development, which is fueling revenue generation.
Recent Developments July 18, 2022 -Eastman announced a planned increase of its Eastman Therminol® 66 heat transfer fluid manufacturing capacity in Anniston, Alabama. The plant expansion is expected to be complete in 2024 and will increase U.S.-based capacity by 50%.On the basis of geographies, the global market has been divided into North America, Asia Pacific, Europe, South America, and Middle East & Africa. The North America region accounted for the largest volume-based share of 42%. It is the dominant market with key macroeconomic indicators, such as high per capita income & manufacturing output, supporting the region’s growth.
Rapid industrialization coupled with the growing export of chemicals to NAFTA countries is expected to drive the demand for HTFs. The country also has a strong presence in the plastic manufacturing industry.
[caption id="attachment_11774" align="alignleft" width="680"]
Want to know more about the report or any specific requirement?
We asked them to research ‘ Equipment market’ all over the world, and their whole arrangement was helpful to us. thehealthanalytics.com insightful analysis and reports contributed to our current analysis and in creating a future strategy. Besides, the te
We asked them to research ‘Equipment market’ all over the world, and their whole arrangement was helpful to us. thehealthanalytics.com insightful analysis and reports contributed to our current analysis and in creating a future strategy. Besides, the te
Our Report’s database covers almost all topics of all regions over the Globe.
Tie ups with top publishers around the globe.
Complete pre and post sales support.
Complete secure payment process.